BGBFC - SOLDER SEAL LIQUID WRENCH #1
- MSDS: BGBFC
- Manufacturer: RADIATOR SPECIALITY CO
- Product Name: SOLDER SEAL LIQUID WRENCH #1
- National Stock Number: 9150-00-973-9504
Product Identification
Product ID:SOLDER SEAL LIQUID WRENCH #1
MSDS Date:04/01/1987
FSC:9150
NIIN:00-973-9504
MSDS Number: BGBFC
Responsible Party
CHARLOTTE, NC 28234
US
Emergency Phone: 704-377-6555
Info Phone: 704-377-6555
Preparer: I. LIEBMAN, TECH DIRECTOR
Cage: 77628
Contractor
Telephone: 704-377-6555/303-623-5716
Cage: 77628
Ingredients
ALIPHATIC PETROLEUM DISTILLATE (KEROSENE)
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 89-90%
ACGIH TLV: 100 PPM
PETROLEUM MINERAL OIL
CAS: 64742-06-9
Fraction By Weight: 8-9%
ACGIH TLV: 5 MG/CUM MIST
NON-HAZARDOUS COMPONENTS
Fraction By Weight: 1-3%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:PRODUCT IS IRRITANT TO ALL BODY
TISSUES AND HAS MILD NARCOTIC EFFECT WHEN INHALED.
Explanation of Carcinogenicity:MFR STATES BOTH INGREDIENTS IDENTIFIED
ARE LISTED AS POSSIBLE CARCINOGENS BY NPT; NOT FOUND IN HMIS
REPERENCES.
Effects of Overexposure:EYE:IRRITATION SKIN: IRRITATION WITH DERDITITIS
WITH REPEATED/PROLONGED EXPOSURE INHALED: LUNG IRRITATION,
DIZZINESS WITH EXCESSIVE INHALLATION, CHEMICAL PNEUMONIA IF
ASPIRATED DIRECTLY. INGESTED: G/ I IRRITATION,NAUSEA.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:EYE: FLUSH WITH WATER. SKIN: REMOVE CONTAMINATED
CLOTHING,LAUNDER BEFORE REUSE. WASH WITH SOAP & WATER. INHALED:
REMOVE TO FRESH AIR. GIVE OXYGEN,CPR AS NEEDED. INGESTED: DO NOT
INDUCE VOMITING. GE T IMMEDIATE MEDICAL ATTENTION. DO NOT
ADMINISTER EPINEPHRINE OR ADRENALIN.
Fire Fighting
Flash Point Method:TCC
Flash Point:OVER 120F/49C
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE
Fire Fighting Procedures:WEAR SELF CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:FIRE MAY BE SPREAD BY USING WATER AS
EXTINGUISHING MEDIUM.
Accidental Release
Spill Release Procedures:VENTILATE AREA. REMOVE IGNITION SOURCES.
CONFINE SPILL. MOP UP AND TRANSFER TO WASTE DRUM FOR DISPOSAL.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE IN A COOL DRY AREA,AWAY.FROM
IGNITION SOURCES AND OXIDIZERS.
Other Precautions:KEEP AWAY FROM CHILDREN AND ANIMALS.
Exposure Controls
Respiratory Protection:NIOSH APPROVED SELF CONTAINED OR SUPPLIED AIR
RESPIRATOR.
Ventilation:GENERAL VENTILATION
Protective Gloves:SOLVENT RESISTANT GLOVES AND APRON
Eye Protection:SPLASH GOGGLES OR FULL FACE SHIELDS
Other Protective Equipment:ABOVE ARE FOR CONTINUOUS EXPOSURE. FOR USUAL
INTERMITTANT USE, ONLY SAFETY GLASSES ARE NECESSARY.
Work Hygienic Practices:USE NORMAL INDUSTRIAL HYGIENE.
Supplemental Safety and Health
FOMULATION HAS NOT CHANGED FROM PREVIOUS P/N IND. LAST CHANGE WAS AUG
86;REMOVAL OF BENZENE. THIS IS NOT A 2 PART PRODUCT. THIS NSN HAS
BEEN DELETED IN FAVOR OR NSN 9150-00-261-7899
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:OVER 300F
Spec Gravity:0.82
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK LIQUID, PETROLEUM ODOR
Percent Volatiles by Volume:90%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES, OPEN FLAME
Hazardous Decomposition Products:NORMAL COMBUSTION PRODUCTS:
SMOKE,CARBON DIOXIDE, CARBON MONOXIDE, SULFUR OXIDES
Disposal
Waste Disposal Methods:DISPOSE I/A/W FEDERAL,STATE,LOCAL REGULATIONS.
INCINERATION IS SUGGESTED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.